Integrated, panel-ready and drawer dishwashers — the appliance with a pump, a heater and a water supply all behind a cabinet panel.
Tell us the appliance and what it is doing. We will come and look.
Service for 16 major and premium appliance brands
The fault list changes with the format. A built-in column and a counter-depth machine fail in different places, and the one that has to come out of the cabinetry needs the extra pair of hands.
Hidden behind a cabinet panel
The panel is screwed to the door, so the hinge springs are carrying weight they were adjusted for once. A door that drops is a spring, not a hinge.
Water in the sump after a cycle
Standing water is the drain pump, the filter or the air gap at the sink — and often the last of those, which is not the dishwasher at all.
Dishes coming out gritty
Poor washing is almost never the motor. It is spray arms, the filter, or an inlet valve not filling to the level the cycle needs.
Water down the cabinet front
A slow leak at the door seal marks the cabinetry long before anyone notices the puddle. Finding where it starts matters more than the part.
Single and double drawer units
Two independent machines in one cabinet, each with its own seal and lid mechanism. The lid seal is the usual fault and it is specific to this format.
A cycle that will not start or finish
A machine that stops part way is usually a sensor telling the board something it does not like — heat, water level or the door latch.
Every brand here builds dishwashers, and every card is about that machine. The parts we fit match the original specification.
The benchmark for integrated dishwashing and the brand most often hidden behind a cabinet panel. Drainage and door springs are most of what these calls come down to.
Built to a longer service life than the category expects, with fault codes that read cleanly and parts that stay available.
Shares its platform with Bosch at the engineering level, with a panel-ready front and the Star-Speed cycle on top.
DishDrawer is a format of its own: two independent machines, each with a lid seal and a mechanism that is specific to this brand.
Panel-ready and front-control machines with the widest parts availability of the premium group.
Panel-ready dishwashers built to take a heavy custom front, which puts real load on the hinge and spring assembly.
Integrated machines on a widely serviced platform, so parts are available and the wait is short.
The most widely serviced dishwasher in the city. The faults repeat and the parts are inexpensive, which usually means a same-visit repair.
We repair dishwashers from Dacor, JennAir, LG, Samsung, Maytag and Frigidaire too — they are not the specialist end of the trade, and they are not priced like it.
Plenty of shops will turn up. These are the parts of the job that decide whether the repair actually holds.
Sub-Zero, Viking, Wolf and Thermador are built differently from mass-market machines, and they fail differently. These are the units our techs are on every day, so the fault gets recognized rather than hunted for.
Parts and labor are covered for up to twelve months depending on the repair, and the term is written on your invoice rather than left vague.
Parts that match the original specification. A cheaper substitute in a sealed system is how a one-visit repair becomes three.
The visit costs $99. Go ahead with the repair on that same visit and the fee comes off the bill, so the diagnosis is effectively free. Decide not to, and you have paid $99 for a straight answer and owe nothing further.
You see the price and approve it first. No work starts, and nothing is ordered, until you have said yes.
Most calls across the Valley get a technician out the same day, and anything leaking or unsafe goes to the front of the run.
BHGS #50900 for Major Appliance Repair, independently confirmed by Yelp. Fully insured, so a mistake in your kitchen is our problem and not yours.
Floors protected, the unit back on its rails, and the packaging gone with us. A built-in has to come out before most repairs can start.
From the first call to the final test, every step is built around your time and your kitchen.
Call or send the form. Brand, model if you have it, and what the appliance is actually doing — that is usually enough to know what to bring.
A technician finds the fault and explains it in plain terms, including the parts involved and what it will cost.
Written, flat, and agreed before any work begins. If you would rather not go ahead, that is fine — you pay the call-out and nothing more.
Most repairs finish on the first visit. The work and the parts are warrantied, and we check back that it held.
We cover 53 cities and neighborhoods, from the Conejo Valley to Long Beach.
We cover 53 cities and neighborhoods across Los Angeles and the Conejo Valley, from the Conejo Valley to Long Beach.
“This company is fantastic. Art worked tirelessly on my SubZero. We had multiple problems and he came out every time that I called him. They are reliable, honest, and quick. Thank you Art and Victor!”
“I am a property manager in LA County with multiple properties. MKH Appliance Repair is my go-to solution for all things appliance related. They have been helping me get repairs done quickly for the past 2-3 years. I cannot thank them enough for the quality service they provide! If you need your appliances fixed, call them!!…”
“… The Appliance Repairman arrived promptly and was incredibly professional and knowledgeable. He diagnosed the problem with my refrigerator quickly and explained the repair process clearly. The repair was done efficiently, and my appliance is now functioning perfectly. Their customer service was outstanding from start to finish.…”
The things people ask us most, answered plainly. If yours is not here, phone and ask.
(213) 523-3555Tell us the brand and what it is doing. Most repairs finish on the first visit, and you will know the price before any work starts.