Wall, island, insert and downdraft hoods — the appliance judged on the duct run behind it rather than on the blower inside it.
Tell us the appliance and what it is doing. We will come and look.
Service for 16 major and premium appliance brands
The fault list changes with the format. A built-in column and a counter-depth machine fail in different places, and the one that has to come out of the cabinetry needs the extra pair of hands.
Mounted above the range, ducted up
Fans that rattle, lights that flicker, extraction that is not moving the air it used to. The blower is rarely the part that has changed.
Suspended, ducted through the ceiling
A long vertical run through a ceiling void, which is where the airflow is actually lost. Balance and damper position matter more than power.
Built into custom joinery
A liner inside a built cabinet, which means the whole surround comes off before the blower is reachable. That gets planned, not discovered.
Venting from the surface down
A motor under the counter and a duct run behind the cabinets. A downdraft that has stopped pulling is usually the damper or the run.
What actually kills extraction
Baffle and mesh filters left too long change the airflow before any part fails. Half of what we are called out for is maintenance, and we will tell you when it is.
Touch pads, remotes and LEDs
A hood that will not respond is normally the control pad or its ribbon rather than the motor, and a dark hood is an LED driver.
Every brand here builds range hoods, and every card is about that machine. The parts we fit match the original specification.
Pro wall and island hoods with internal or remote blowers. The remote blower option moves the noise outside and the service point with it.
Heavy-gauge hoods and liners with real extraction, built to take a custom surround.
Wall, island and insert hoods with board-driven controls and a well-documented blower platform.
The brand that made downdraft venting normal. The blower and damper under the counter are as much of the service as the surface above.
Quiet extraction with readable electronics, often fitted flush into joinery with minimal clearance.
Wall, insert and downdraft hoods built for low noise, board-driven and widely documented.
Wall, island and insert hoods on a widely serviced platform, which keeps parts available and the wait short.
Wall and under-cabinet hoods with the widest parts availability of the premium group.
We repair range hoods from Dacor, Fisher & Paykel, LG, Samsung, Whirlpool, Maytag and Frigidaire too — they are not the specialist end of the trade, and they are not priced like it.
Plenty of shops will turn up. These are the parts of the job that decide whether the repair actually holds.
Sub-Zero, Viking, Wolf and Thermador are built differently from mass-market machines, and they fail differently. These are the units our techs are on every day, so the fault gets recognized rather than hunted for.
Parts and labor are covered for up to twelve months depending on the repair, and the term is written on your invoice rather than left vague.
Parts that match the original specification. A cheaper substitute in a sealed system is how a one-visit repair becomes three.
The visit costs $99. Go ahead with the repair on that same visit and the fee comes off the bill, so the diagnosis is effectively free. Decide not to, and you have paid $99 for a straight answer and owe nothing further.
You see the price and approve it first. No work starts, and nothing is ordered, until you have said yes.
Most calls across the Valley get a technician out the same day, and anything leaking or unsafe goes to the front of the run.
BHGS #50900 for Major Appliance Repair, independently confirmed by Yelp. Fully insured, so a mistake in your kitchen is our problem and not yours.
Floors protected, the unit back on its rails, and the packaging gone with us. A built-in has to come out before most repairs can start.
From the first call to the final test, every step is built around your time and your kitchen.
Call or send the form. Brand, model if you have it, and what the appliance is actually doing — that is usually enough to know what to bring.
A technician finds the fault and explains it in plain terms, including the parts involved and what it will cost.
Written, flat, and agreed before any work begins. If you would rather not go ahead, that is fine — you pay the call-out and nothing more.
Most repairs finish on the first visit. The work and the parts are warrantied, and we check back that it held.
We cover 53 cities and neighborhoods, from the Conejo Valley to Long Beach.
We cover 53 cities and neighborhoods across Los Angeles and the Conejo Valley, from the Conejo Valley to Long Beach.
“This company is fantastic. Art worked tirelessly on my SubZero. We had multiple problems and he came out every time that I called him. They are reliable, honest, and quick. Thank you Art and Victor!”
“I am a property manager in LA County with multiple properties. MKH Appliance Repair is my go-to solution for all things appliance related. They have been helping me get repairs done quickly for the past 2-3 years. I cannot thank them enough for the quality service they provide! If you need your appliances fixed, call them!!…”
“… The Appliance Repairman arrived promptly and was incredibly professional and knowledgeable. He diagnosed the problem with my refrigerator quickly and explained the repair process clearly. The repair was done efficiently, and my appliance is now functioning perfectly. Their customer service was outstanding from start to finish.…”
The things people ask us most, answered plainly. If yours is not here, phone and ask.
(213) 523-3555Tell us the brand and what it is doing. Most repairs finish on the first visit, and you will know the price before any work starts.