Single and double wall ovens, speed ovens and warming stacks, built into cabinetry at eye level where every repair starts by getting the unit out of the wall safely.
Tell us the appliance and what it is doing. We will come and look.
Service for 16 major and premium appliance brands
The fault list changes with the format. A built-in column and a counter-depth machine fail in different places, and the one that has to come out of the cabinetry needs the extra pair of hands.
24, 27 and 30 inches, flush in cabinetry
One cavity, and the whole unit has to come forward on its runners before the back panel is reachable. The cabinet opening is rarely square.
Two cavities in one stack
Twice the weight and one shared control board, so a fault in the lower cavity often shows as a symptom in the upper one.
Plumbed and reservoir-fed
Scale is the usual culprit on Los Angeles water. Descaling faults, a reservoir that will not prime and a blocked generator account for most of what we see.
Combination cavities in a wall stack
Two cooking systems sharing one cavity and one door. The magnetron side and the convection side fail independently and are diagnosed separately.
Less common, and less commonly serviced
A gas cavity in a wall opening needs a leak check and a flue check before anything else, and plenty of shops will not take them on.
The cycle that breaks things
A clean cycle runs the cavity far past normal temperature and is the most common trigger for a dead thermal fuse or a door lock that will not release.
Every brand here builds ovens, and every card is about that machine. The parts we fit match the original specification.
The cavities hold temperature well and the fault is usually the control or the door seal rather than the heat. The clean cycle is hard on both.
Masterpiece and Professional wall ovens with a lot of electronics behind the fascia and a touch panel that takes the heat from the cavity below.
The best fault codes in the category, including on the steam and combination cavities, which turns guesswork into a reading.
Heavy doors on heavier hinges, and springs that go long before anything electrical does. A door that will not stay shut is a sealing fault.
Single and double wall ovens on a widely serviced platform, so parts are available and the wait is short.
More control hardware than most of the category. When a Dacor oven is behaving strangely rather than failing outright, start at the board.
Benchmark and 800-series wall ovens, often fitted into a stack with the speed oven above. Reliable, and board-driven when they are not.
Single, double and combination wall ovens with the widest parts availability of the premium group.
We repair ovens from Fisher & Paykel, JennAir, LG, Samsung, Whirlpool, Maytag and Frigidaire too — they are not the specialist end of the trade, and they are not priced like it.
Plenty of shops will turn up. These are the parts of the job that decide whether the repair actually holds.
Sub-Zero, Viking, Wolf and Thermador are built differently from mass-market machines, and they fail differently. These are the units our techs are on every day, so the fault gets recognized rather than hunted for.
Parts and labor are covered for up to twelve months depending on the repair, and the term is written on your invoice rather than left vague.
Parts that match the original specification. A cheaper substitute in a sealed system is how a one-visit repair becomes three.
The visit costs $99. Go ahead with the repair on that same visit and the fee comes off the bill, so the diagnosis is effectively free. Decide not to, and you have paid $99 for a straight answer and owe nothing further.
You see the price and approve it first. No work starts, and nothing is ordered, until you have said yes.
Most calls across the Valley get a technician out the same day, and anything leaking or unsafe goes to the front of the run.
BHGS #50900 for Major Appliance Repair, independently confirmed by Yelp. Fully insured, so a mistake in your kitchen is our problem and not yours.
Floors protected, the unit back on its rails, and the packaging gone with us. A built-in has to come out before most repairs can start.
From the first call to the final test, every step is built around your time and your kitchen.
Call or send the form. Brand, model if you have it, and what the appliance is actually doing — that is usually enough to know what to bring.
A technician finds the fault and explains it in plain terms, including the parts involved and what it will cost.
Written, flat, and agreed before any work begins. If you would rather not go ahead, that is fine — you pay the call-out and nothing more.
Most repairs finish on the first visit. The work and the parts are warrantied, and we check back that it held.
We cover 53 cities and neighborhoods, from the Conejo Valley to Long Beach.
We cover 53 cities and neighborhoods across Los Angeles and the Conejo Valley, from the Conejo Valley to Long Beach.
“This company is fantastic. Art worked tirelessly on my SubZero. We had multiple problems and he came out every time that I called him. They are reliable, honest, and quick. Thank you Art and Victor!”
“I am a property manager in LA County with multiple properties. MKH Appliance Repair is my go-to solution for all things appliance related. They have been helping me get repairs done quickly for the past 2-3 years. I cannot thank them enough for the quality service they provide! If you need your appliances fixed, call them!!…”
“… The Appliance Repairman arrived promptly and was incredibly professional and knowledgeable. He diagnosed the problem with my refrigerator quickly and explained the repair process clearly. The repair was done efficiently, and my appliance is now functioning perfectly. Their customer service was outstanding from start to finish.…”
The things people ask us most, answered plainly. If yours is not here, phone and ask.
(213) 523-3555Tell us the brand and what it is doing. Most repairs finish on the first visit, and you will know the price before any work starts.